If 3D Sensor has a communication problem (yellow LED)
Disconnect the connection box power cable
Wait 15 seconds. Then reconnect the connection box power cable
Sensor reboots
The sensor starts power-on cycle
The yellow LED starts blinking
And change to green when the connection is OK
If the sensor still blinking yellow LED
● Wait a few minutes
● Unplug LAN cable from the sensor and wait 10 seconds. Then reconnect the LAN cable
● Wait the sensors rebooting
● Wait few minutes. If the sensor still blinking yellow led the problem is connection box communication modem.
● Contact helpdesk@visit.fi
